BPS – K – 3.0 – 6.0
Sherpa
Autodiagnostik
page: 32
11.
Disassembly and Disposal
11.1
Safety
11.1.1 Essential Safety Guidelines
- The power line for the power supply must be disconnected by qualified personnel.
11.1.2 Description of disassembly work
- Remove all line connections between the roller set, the control box and the display units.
- Unscrew the control box and the display units.
- Loosen and remove the foundation adjusting screws from the roller set.
- Screw the eyebolt on top of the roller set, hook the carriage straps into the ring and pull the roller
set out of the foundation with the help of a lifting equipment.
11.2
Disassembly
11.2.1 Essential Safety Guidelines
- use a lifting equipment with sufficient lifting capacity
11.3
Description of Disposal Work
11.3.1 Overview
- Legal regulations must be taken into account at the time of the disposal.
11.3.2 Description
- The transmissions of the driving engines are filled with oil which must be disposed of separately.
- Electronic circuit boards must be disposed of separately.
- This also applies for remote controls and printers.
- Sheet metal and iron parts are scrap metal.
