Sherpa BPS-Kompakt 3.0, Руководство по эксплуатации

Страница: 30 / 35

BPS – K – 3.0 – 6.0
Sherpa
Autodiagnostik page: 30
increased defect right pointer – 13
slip sensor engine right –
increased defect
orange LED flashes
right pointer – 14
replace the sensor
distance sensor left – line break orange LED flashes
right pointer – 15
check the cabling
distance sensor right – line break orange LED flashes
right pointer – 16
check the cabling
distance sensor left –
point zero too small/high
orange LED flashes
right pointer – 18
check the sensor adjustment
distance sensor right –
point zero too small/high
orange LED flashes
right pointer – 19
check the sensor adjustment
sideslip sensor for wheel
alignment – ine break orange LED flashes
right pointer – 20
check the cabling
sideslip sensor for wheel
alignment –
point zero too small/high
orange LED flashes
right pointer – 21
check the sensor adjustment
Warnings
(A limited operation via the automatic button is possible after the warning has occurred)
Cause Illustration
(scale 0-40)
Remedy
Possible cause(s) Fault / Error message Corrective Actions
The wheels of the vehicle rest
between the set of rollers when
the test stand is started. Automatic mode cannot be
switched on - after pushing the
button the test stand will start in
manual mode. Drive the vehicle off the set of
rollers
(Automatic auxiliary drive-off
system if main switch is switched
on)
braking force sensor left - point
zero too high green LED flashes
left pointer – 1
limited measuring range
braking force sensor right - point
zero too high green LED flashes
left pointer - 2
limited measuring range