SHC SHR-100, Руководство пользователя

Страница: 48 / 106

SHR-1000 User Manual 2014 Copyright ©
48
• If the screen do not respond to touches made on it or the touches are off-
point, the touch screen is needed to be calibrated to set the touch points
properly.
1. Tap
Start > Settings > System > Screen.
2. Set/configure the touch points in the General Tab.
3. Tap on the Align Screen button to start calibrating the touch points.
4. Using the stylus pen, tap the target ( ) firmly and accurately at each
location on the screen. The target will continue to move until the screen is
aligned. When the target disappears, tap the screen once to complete the
calibration process.
5. When you are done, tap on the OK button to accept/save the changes
made on the window.
Screen
Ⅳ
-4