SHR-1000 User Manual 2014 Copyright ©
10
1
▶
Initializing the Mobile Device back to the factory
default settings (Hard Reset)
There are many possible reasons why the Mobile Device has to be
reinitialize back to the factory default setting, like, when the device would not
respond even after performing a reset or the user forgets the password set
on the system. This process is called
“Hard Reset.” When performing hard
reset, all information in the RAM (files, system settings, installed programs)
will be cleared.
To insure the safety/integrity of the information, make a backup or make a
copy of it in the SD card before performing a hard reset. Restore the
information after the hard reset process to recover the information.
As said earlier, all information stored in the Mobile
Device’s RAM will be
cleared after performing a hard reset. However, it is possible to recover
information backed up to the PC, SD card or the Web folder
To perform a Hard Reset:
1. Remove the Mobile Device form the cradle.
2. Remove the battery and then reinsert it again after a few seconds.
3. Press and release the [
Power
] button
4. Press and hold the
[Green]
(Numeric Keypad) or
[Orange]
(Qwerty
Keypad) button for 10 seconds.
5. Wait for the calibration screen to appear
6. Release the
[
Green
]
or
[Orange]
button
Numeric Keypad : [
Green
] button Qwerty Keypad
: [Orange]
button
Initialize to factory default
VIII-2
Содержание SHR-100
Страница 1: ...SHR 1000 USER MANUAL COPYRIGHT SHC 2014 ALL RIGHTS RESERVED...
Страница 39: ...SHR 1000 User Manual 2014 Copyright 39 Use File Explorer 1 Run and use the File Explorer...
Страница 64: ...SHR 1000 User Manual 2014 Copyright 64 Using Add on Devices 1 BCR 2 WLAN 3 GPS V...
Страница 106: ...SHR 1000 User Manual 2014 Copyright 10 SHR 1000 USER MANUAL...