SJGF60XT
33
HOW TO INSTALL DUCT RT ASS'Y COVER
7.
Insert two claws (located in the center) of the Duct RT ass'y cover into the holders at the ceiling inside the
1.
refrigerator compartment.
2. After inserting two claws at the right and left side into the holders, tuck the Duct RT rivets into the holders.
①
①
②
②
(outside)
(Inside)
(outside)
* (Inside) will have a gap.
(Inside)
Duct RT rivet
Duct RT ass’y
With a Duct RT rivet inserted,
the claw of the Duct RT ass'y cover is spread apart
and held in place in the holder at the ceiling.
Duct RT rivet
<< Structural view of Duct RT rivet section >>
Duct RT rivet
After inserting the Duct RT rivets, confirm that
the head of the Duct RT rivet and the edge (outside)
of the depression of the cover are at the same height.
【
How to remove Duct RT rivet
】
There is a space at the back of a Duct RT rivet.
Insert a flathead screwdriver into the space
and pull out the rivet.
