Sharp PN-V701 Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 70

background image

69

E

•  When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.
•  Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
•  This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials

such as plaster / thin plastic board / wood before starting installation.

• This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.

Install by the most suitable method for the material and the structure.

• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the

thickness of the mounting bracket.

Screws (M6)
Mounting bracket
Monitor mounting

5/16 - 3/8 inch (8-10 mm)

• Do not use an impact driver.
• When moving the monitor, be sure to hold it with the handles. Do not hold the top, bottom, or sides of the monitor. Do not

hold the LCD panel. Also, do not orient the monitor so that the LCD panel faces the ground. This may cause product damage,
failure, or injury.

•  When performing an installation where the monitor is stacked, please install it such that load is not placed on the monitor.
•  After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.
•  Do not use any screw holes other than VESA holes for installation.

Mounting Precautions

(For SHARP dealers and service engineers)

«
...
67
68
69
70
»

Содержание PN-V701







































































Отзывы:

Нет отзывов

Похожие инструкции для PN-V701

Бренд: NAiS Страницы: 208

Бренд: Panasonic Страницы: 36

Бренд: Panasonic Страницы: 16

Бренд: Panasonic Страницы: 28

Бренд: Panasonic Страницы: 169

Бренд: Panasonic Страницы: 95

SyncMaster VC240

Бренд: Samsung Страницы: 16

Бренд: Samsung Страницы: 2

Бренд: BABY DELIGHT Страницы: 12

Бренд: Baby Control Страницы: 12

Бренд: Daewoo Страницы: 15

Бренд: Ocean Matrix Страницы: 2

Бренд: Sanitas Страницы: 33

Бренд: Sanitas Страницы: 60

Бренд: Sanitas Страницы: 96

Бренд: Sanitas Страницы: 52

Бренд: Elo TouchSystems Страницы: 37

Intelli sense 7300REL

Бренд: ReliOn Страницы: 88

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды