Sharp PN-V701, Руководство по эксплуатации

Страница: 28 / 70

28
E
Menu Items
n
SETUP
DATE/TIME SETTING
Set the date and time. Press the or button to select the date and time, and press the or button to change the
numerical values.
Set the date in “Day/Month/Year” order.
Set the time on a 24-hour basis. (Factory default)
DATE/TIME FORMAT
Sets the date/time display format.
DATE ..................MM/DD/YYYY, DD/MM/YYYY, YYYY/MM/DD
(YYYY: Year, MM: Month, DD: Day)
TIME ...................Select 12- or 24-hour time.
SCHEDULE (See page 35.)
You can turn the power on/off and change the screen brightness at a specified time.
LANGUAGE
Sets the display language for the menu screen.
INPUT SELECT
D-SUB
Select the input mode to be used in D-sub input terminal.
HDMI CEC LINK
AUTO ............Use the HDMI CEC function.
If the device connected to the HDMI input terminal supports CEC, the input mode of the monitor changes to
HDMI when playback starts on the device.
OFF ...............HDMI CEC function is not used.
AUTO POWER ON
This can be set when HDMI CEC LINK is set to AUTO.
If the device connected to the HDMI input terminal supports CEC, you can specify whether or not the monitor power turns on
when the device power is turned on.
HDMI AUTO VIEW
When ON is selected, the screen size is adjusted automatically according to the screen size control signal included in the
video signal input from the HDMI1 and HDMI2 input terminals or the expansion slot (when the expansion function is used).
HOT PLUG CONTROL
Sets whether to use hot plug control for the DVI-D, HDMI1 and HDMI2 input terminals, and the expansion slot (when the
expansion function is used).
DisplayPort STREAM
Selecting MST (Multi Stream Transport) allows different images to be displayed when daisy chaining two devices through the
monitor’s DisplayPort. Image may not be displayed properly depending on the computer (video card) to be connected.
DisplayPort SETTING
Sets FILTER SETTING, GAIN, and OFFSET for the signal from the DisplayPort input terminal.
AUDIO SELECT
Selects the terminal used to input audio signals in each input mode.
AUDIO OUTPUT
Sets the volume of sound output from the audio output terminal.
VARIABLE .......... You can adjust the volume from the audio output terminal by using VOLUME.
FIXED ................. Fixes the volume from the audio output terminal. Adjust the volume by using an external device.
START INPUT MODE
You can set the input mode that will be in effect when the power is turned on.
When this is set to LAST INPUT MODE, the input mode when the power was last turned off will appear.