31
E
Whiteboard
Drawing
The line/eraser setting is assigned to each touch pen (thin/thick) and finger.
Operate with what you use to draw.
1. Touch one of “Pen palette 1” to “Pen palette 3”.
If the line you want to draw does not exist, touch one of “Pen palette 1” to “Pen palette 3” twice. You can change the line
setting (non-transparent/transparent, thickness, color).
2. Draw.
TIPS
• On the touch pen (supplied), you can set the thin tip and thick tip of the pen separately.
When this software is launched, the thin tip is set to “Pen palette 1”, and the thick tip is set to “Eraser”.
• To draw with only a touch pen, select “Draw only with pen”. (See page 34.)
To use your finger to draw, select “Draw with pen and finger”. (See page 34.)
• When this software is launched, drawing by finger is set to “Pen palette 1”.
Erasing a drawn line
The line/eraser setting is assigned to each touch pen (thin/thick) and finger.
Operate with what you use to erase.
1. Touch
.
To change the size of the eraser, touch
twice.
2. Move while continuing to touch the place you want to erase.
The part you move over is erased.
TIPS
• On the touch pen (supplied), you can set the thin tip and thick tip of the pen separately.
When this software is launched, the thin tip is set to “Pen palette 1”, and the thick tip is set to “Eraser”.
• To use your finger to erase, select “Draw with pen and finger”. (See page 34.)
You can erase an area of the screen that you touch with your palm.
Touch the screen with your palm, and when the cursor is appear, move your palm.
