24
E
Basic Operation
Using the remote control unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
1. HDMI
Switch the input mode to HDMI1, HDMI2 or HDMI3.
2. Numeric input buttons
These buttons are used for setting such as LAN setting.
3. MUTE
Turns off the volume temporarily.
Press the MUTE button again to turn the sound back to the
previous level.
4. MODE (Color mode selection)
In video input mode (other than “APPLICATION”), the color
mode changes.
The menu is displayed.
Press the or button to select the color mode.
• High Illuminance is a display with colors suited to bright
locations.
5. /- (Volume adjustment)
Press + or - to adjust the volume.
6. INFORMATION
Displays monitor information.
X.X.X
XXXXXXXX
XXXX-XXXXXX-XX-XXXX
XXXXXXXX
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XX:XX:XX:XX:XX:XX
XX:XX:XX:XX:XX:XX
The display changes from “Information1” → “Information2” →
clear display, and so on every time you press this button.
When displaying “Information”, the display changes from
“Information1” → “Information2” → “Information1”, and so on
every time you press the button.
Pressing the RETURN button disappears the display.
• The display disappears automatically after about 15
seconds.
7. FUNCTION
Use this to display the FUNCTION menu. (See page 50.)
8. ENTER
Confirms the setting.
9. FREEZE
Freezes the video shown on the monitor. (See page 28.)
In some cases a residual image may occur. Do not freeze the
video for a long time.
