Sharp PC-MM Series, Руководство пользователя

Страница: 141 / 146

T-11
•
Make sure that the operating system of the host computer is Windows XP,
Windows 2000, or Windows Me.
•
Slide the connection switch to OFF and then back to ON . You may not have
stopped the connection properly.
Why is the MM series recognized as removable disk, or why can’t I access
to the MM series from the host PC?
•
You cannot access to the MM series from the host PC when you set a user
password in the Setup Utility of the MM series. Cancel the password using the
Password Utility . (Refer to Canceling Password section of Chapter 7.)
•
If you remove the MM series from the connection cradle without canceling the
password and then delete the password using the Setup Utility, the MM series may
be recognized as removable disks of the host computer when connected once again.
In this case, run the
Password Utility on the host computer and restart the host
computer.
Why is the data transfer from the MM series to the host PC so slowly?
Or why can’t I use the data transfer speed of USB2.0?
•
Make sure that the host PC supports USB 2.0.
•
Make sure that the host computer and the connection cradle is connected using the
supplied DirectHD cable.
Why can’t I cancel the password?
•
Make sure that the MM series is correctly inserted in the connection cradle.
Other Troubles
Why is the battery pack discharged so quickly?
•
Condition the battery pack. (Refer to Conditioning the Battery Pack section of
Chapter 3.)
Why is the date and/or time incorrect?
•
Correct the date and time in Windows. Double-click the time appearing on the
taskbar and set them in
Date and Time Properties dialog box.