MX-M753N MX-FN15/FN16 5 – 6
8)
Loosen the fixing screws (2 pcs for each) of four casters.
9)
Remove the spanner stored inside of the front cabinet upper.
10) Turn the bolt with the removed spanner so that the guide pin is
in the specified range of the scale.
(At that time, lift the finisher a little, and the bolt can be turned
manually.)
11) After completion of the adjustment, tighten the caster fixing
screws (8 pcs.).
12) Close the front cabinet lower and the front cabinet upper.
13) Check to insure that the intervals at the upper and the lower
sides of the main unit and the finisher are even.
14) Attach the foot covers in front and at the back of the finisher
and the rear cover on the rear side, and tighten all the fixing
screws.
