MX-M753N MX-CF10 4 – 5
E. Install the upper limit regulation wire to the
inserter
1)
Open the front door of the inserter, and install the upper limit
regulation wire with the two fixing screws E.
F. Install the inserter to the finisher
1)
Open the front door of the inserter, and loosen the lock fixing
screw until the screw is released.
2)
Stand the tray.
3)
Hold the lower section of the front cabinet and the grip of the
rear cabinet as shown in the figure, tilt the inserter a little so
that the indication hole in the inserter support section is fit with
the metal fixture of the finisher connecting plate installing sec-
tion, and install it.
* At that time, check that the finisher lock lever is engaged on
the inserter groove securely.
4)
Tighten the fixing screw of the inserter lock to fix the inserter
and the finisher.
