MX-M753N MX-LCX3N 3 – 5
<3> Check the height of "D.-1)". If the height is not proper, go
to <2>. If the height is proper, install the positioning plates
to the front and the rear sides and fix them with the fixing
screws B (1 for each side).
F side
R side
<1> Loosen the caster screw in the lower section of the LCC
right side.
<2> Turn the adjuster to lower the LCC right side.
<3> Tighten the caster screw.
Right side
<4> Check the height of “D.-1)”. If the height is not proper,
separate the LCC (the procedure is described later) and
go to “b”. If the height is proper, install the positioning
plates to the front and the rear sides with fixing screws B.
F side
R side
2)
Check to confirm that the upper section of the LCC left side is
locked. After checking, lower the adjuster on the lower section
of the LCC right side until it does not rotate.
Locked state
Adjuster section
c. If the upper section of the LCC left side is locked first
and the positioning plate cannot be inserted
Since the LCC can shift due to the weight of the
paper when closing the tray, ensure that the
adjusters are securely touching the floor.
