MX-M753N MX-CF10 4 – 8
K. Finisher and inserter height adjustment
1)
Check the height of the inserter front cabinet and the finisher
front cabinet.
2)
Check the height of the inserter rear cabinet and the finisher
rear cabinet.
(1) When the height is proper
Go to procedure L..
(2) When the height is not proper
a. Adjust the height of the front side
1)
Open the finisher front door upper, remove the spanner stored
in the upper section of the front door.
2)
Open the front door of the inserter, open the front door lower of
the finisher.
3)
Loosen the fixing screws (2 pcs.) of the adjustment section of
the base.
4)
Use the spanner removed in step 1) to adjust the height adjust-
ment bolt so that the upper cabinet is of the same height.
5)
Tighten the adjustment section fixing screws (2 pcs.).
6)
Close the finisher front door lower, and close the inserter front
door.
b. Adjust the rear side height
1)
Remove two screws which are fixing the base cover attached
to the finisher rear side base section, and remove the base
cover.
*
Procedures only for the MX-FN15/FN16
2)
Loosen the adjustment section fixing screws (2 pcs.).
F
R
