MX-7000N MX-PKX1 10 – 1
MX-7000N
Service Manual
[10] MX-PKX1
1. Unpacking
A. Check the packed items
NOTE: To set up the PS driver, do not use the CD-ROM (Package
part No. 1) which is included in the MX-PKX1 but use the
CD-ROM which is included in the MX-PBX1.
2. Installation
<Note before installation>
NOTE: To enable PS3, the product key must be acquired. (For
details of the acquiring method of the product key, refer to
the distributor.)
Write down the acquired product key on the product key
sheet and pass it to the user.
A. Preparation for enabling PS3
1)
To enable PS3, enter the product key by the key operation of
the copier machine.
a) Touch [PRODUCT KEY INPUT].
b) Enter the product key with the 10-key, and touch [OK] key.
2)
After completion of the product key entry, turn OFF the power
switch and the main power switch and turn them ON.
B. PS3 check
1)
Print the test page in PS3 fonts by the key operation of the
operation panel. (Select the PS font list by the procedures
described in the data list print printer test page of the system
setup guide.)
Check to confirm that printing is made normally.
No.
Names of bundles
Quantity
1
CD-ROM (For Screen Font)
1
2
Product key sheet
1
1
2
APPLICATION
NUMBER
MACHINE
SERIAL
NUMBER
PRODUCT
KEY
Please keep below important information.
This information will use for other products.
