Sharp MX 5500N - Color Laser - Copier Скачать руководство пользователя страница 16

Страница: 16 / 104

MX-7000N MX-5500N/6200N/7000N 1 – 13

H. Installation of individual color toner cartridges

Shake the toner cartridge a few times.

Open the toner cover.

Insert the toner cartridge.

* Be sure to install the color cartridges to their proper posi-

tions. Avoid installation to a different color position.

* Do not forcibly insert the toner cartridge.

Keep holding the cartridge and completely insert it.

* When the machine is transported with the development unit

removed, be sure to remove the toner cartridge. (If not, tone
may be clogged.)

* Be sure to insert all of five toner cartridges (Y/M/C/BK1/

BK2).
[Color toner cartridge positions]

Insert the cartridge securely until it locks.

Close the toner cover.

I. Installation of the paper exit tray and the paper

full detection actuator

Install the paper exit tray (Package part No. 2) and the paper
exit full detection actuator (Package part No. 3) to the right
door.

J. Installation of the operation manual pocket

Install the operation manual pocket (Package part No. 4) to the
back side of the machine.

BK1

BK2

Содержание MX 5500N - Color Laser - Copier









































































































Результаты поиска

Содержание MX 5500N - Color Laser - Copier

Отзывы:

Похожие инструкции для MX 5500N - Color Laser - Copier

Бренды по названию

Популярные бренды

Sharp MX 5500N - Color Laser - Copier, Руководство по установке

Результаты поиска

Содержание MX 5500N - Color Laser - Copier

Отзывы:

Похожие инструкции для MX 5500N - Color Laser - Copier

Бренды по названию

Популярные бренды