MX-7000N MX-FRX3, MX-FRX3U 9 – 1
MX-7000N
Service Manual
[9] MX-FRX3, MX-FRX3U
1. Unpacking
A. Check the packed items
1)
Check that all the items are included in the package.
2. Installation
<Note before installation>
* To enable the data security function, the product key must be
acquired.
(For the method of acquiring the product key, contact the dealer.)
* Before installing the data security kit, be sure to perform backup
of data stored in the memory (including HDD) of the main unit.
When the data security kit is installed, all the job data stored in
the memory (including HDD) of the main unit will be lost.
* If the LINE indicator or the DATA indicator for the printer and
image transmission on the operation panel is lit or blinking, data
that has not been processed remains in the memory of the main
unit (including HDD). Output or transmit all the data to clear the
data remaining in the main unit and then start installation. (Check
to insure that neither the LINE indicator nor the DATA indicator
on the operation panel does light up or blink.)
A. Turn OFF the power of the main unit
1)
Turn the power switch located on the operation panel to the
"OFF" position.
2)
After checking that the operation panel has gone out, open the
front cabinet and turn the main power switch to the "OFF" posi-
tion.
3)
Remove the power plug of the main unit from the power outlet.
B. Removal of the control box
* If cables are connected to the control box, remove all cables.
1)
Remove the screw of right rear cabinet, push down the right
rear cabinet. Disengage the pawls, and remove the right rear
cabinet so that slide to the front side.
No.
Names of bundles
Quantity
1
DOCC PWB
1
2
PROG ROM
1
3
BOOT ROM
1
4
Screw
2
5
Operation manual
1
6
Installation manual
1
1
4
2
3
5
6
"OFF"
"OFF"
"OFF"
3
4
1
2
