MX-7000N MX-LCX3 3 – 9
E. Select the paper size
1)
Slowly pull out the paper feed base tray until it stops.
2)
Side plate size changeover
<1>
Loosen the wing bolt (A) on the front and the rear side of the
LCC upper part, and slide the handle to the neutral position.
<2>
Move the side plate to the desired paper size position.
<3>
Slide the handle to the desired paper size position, and lock it
and tighten the wing bolt (A).
3)
Rear edge plate size changeover
<1>
Lift the MC-CL handle at the top of the rear edge plate and
shift it to the desired paper size position.
<2>
Insert the lead edge of the movable shaft into the hole in the
lower section of the rear edge plate with the upper lever, and
lock the rear edge plate to the desired paper size position.
<3>
Push the large capacity tray slowly into the original position.
F. Turn ON the main power switch of the main
unit
1)
Connect the power plug of the main unit into the power outlet.
A3/A4
12/A3W
11
8.5
A4R
B4/B5
A3/A4
12/A3W
11
8.5
A4R
B4/B5
A
A
