Sharp LYNX 3D SH-03C Docomo, Инструкция по эксплуатации

Страница: 101 / 144

99
SH-03C_e_07.fm
[99/106]
Convenient Functions
■
Sending data via infrared
communication
Example: Still picture
1
In the application screen, [Contents
Manager]
2
Touch a still picture for a while
/
[Share]
:
Set the receiving FOMA terminal to receive
data.
3
[Send by Infrared]
■
Sending data via IrSS™
communication
Example: Still picture
1
In the application screen, [Contents
Manager]
2
Touch a still picture for a while
/
[Share]
/
[Send by IrSS]
/
[Yes]
1
In the application screen, [Receive
by Infrared]
2
Select an item
Receive : Receive single data.
Receive All : Receive all data.
･ Data receiving begins if the entered
authentication code matches an
authentication code entered by the sender.
:
As you operate the handset for receiving, set
the sender’s FOMA terminal to send data.
:
After the operation for receiving, the FOMA
terminal waits to receive data. Infrared
communication automatically begins when
data is sent from sender’s FOMA terminal
within 30 seconds.
Sending by Infrared
IrSS™ communication performs a transmission
without confirming the response of the receiver
side since it uses a simplex communication. For
this reason, the sender side completes the
communication normally even if the receiver
side does not.
Receiving by Infrared
Note that if you select [Delete All Before
Registration] at receiving all data, all data
registered to the target function are deleted.
Receiving all data is not available depending on
the data type.
When available memory space in the save
destination becomes insufficient, the data being
received to that point are saved and receiving
ends.
SH-03C_e.book 99 ページ ２０１０年１１月１６日 火曜日 午後４時５１分