Sharp LYNX 3D SH-03C Docomo, Инструкция по эксплуатации

Страница: 34 / 144

32
SH-03C_e_02.fm
[32/48]
Before Using the Handset
When the FOMA terminal is turned on, you can
charge the FOMA terminal by connecting the
FOMA terminal to a PC with the microUSB cable for
PC (sample).
Install the USB driver to the PC in advance. And
also enable USB battery charge (
n
P. 63).
･ Refer to “Manual for USB Driver Installation” in
PDF format in http://galapagossquare.com/
?p=5208 (in Japanese only) for details on
installing USB driver.
For details on connecting to a PC
n
P. 104
■
Turning power on
1
H
(for at least 2 seconds)
■ Turning power off
1
H
(for at least 1 second)
/
[Power
off]
/
[OK]
■ Sleep mode
The screen is off and the sleep mode is activated
when
H
is pressed or the FOMA terminal is not
in use for a set length of time.
Press
H
in the sleep mode to deactivate the
sleep mode.
■ Touch panel lock
When the power is turned on or the sleep mode is
deactivated, the touch panel is locked.
Keep touching [
J
] and slide it right into [
K
] to
unlock.
Key operation in touch panel unlock screen
To set/disable manner mode:
y
(for at least 1
second)
To illuminate Picture Light:
G
(for at least
1 second)
･ Press any key or touch [
J
] to turn off.
To turn off power:
H
(for at least 2 seconds)
Startup Guide is an application to support
beginners to learn operations or initial
settings.
Basic operation practice, basic setting, and
term dictionary are included.
1
In the application screen, [Startup
Guide]
Charging by using microUSB
cable for PC
Turning power on/off
Startup Guide application
SH-03C_e.book 32 ページ ２０１０年１１月１６日 火曜日 午後４時５１分