
98
SH-03C_e_07.fm
[98/106]
Convenient Functions
Use infrared communication to send and receive
data to and from other FOMA terminals which also
support infrared communication.
Send and receive phonebook entries, profile,
notepad, bookmark, mail, data shot by camera,
data in Gallery (3D), data recorded with Voice
Recorder and data in Contents Manager, etc.
The FOMA terminal infrared communication
function complies with IrMC™ 1.1 standard.
However, depending on the function, some data
may not be sent or received even when the other
party’s terminal complies with IrMC™ 1.1
standard.
The FOMA terminal Ir send and receive functions
comply with IrSimple™ standard.
Infrared communication is not available in Offline
mode.
To enter Lock No. and authentication code are
required for sending or receiving all data items.
The authentication code is a password
exclusively for infrared communication. Before
starting data transmission, the sender and
receiver must enter the same user-specified
four-digit code.
■
When using infrared communication
Face the Infrared ports of the receiver’s and
sender’s FOMA terminal each other and set the
distance between them to approximately 20 cm
or less as shown.
While doing infrared communication, keep the
Infrared ports facing each other and do not
move.
Infrared communication may not function
properly in areas of direct sunlight, directly under
fluorescent lights or near other equipment using
infrared signals.
If either of the Infrared ports is dirty, infrared
communication will become difficult. Take care
not to scratch the ports, and wipe off any dirt with
a soft cloth.
Infrared communication
Using infrared communication
Approx. 20 cm
or less
Infrared port
15°
15°
SH-03C_e.book 98 ページ 2010年11月16日 火曜日 午後4時51分
Содержание LYNX 3D SH-03C Docomo
Страница 1: ... 10 11 10 11 1st Edition 10L TU144 1 ...
Страница 144: ... 10 11 10 11 1st Edition 10L TU144 1 ...