Sharp LYNX 3D SH-03C Docomo, Инструкция по эксплуатации

Страница: 28 / 144

26
SH-03C_e_02.fm
[26/48]
Before Using the Handset
2
Hook a finger on the tab and pull
out the tray (
1
)
:
Pull out the tray straight until it stops.
3
Hold the UIM with the IC (gold)
turned down and set on the tray
(
2
)
4
Push the tray all the way in (
3
)
5
Put the back cover onto the FOMA
terminal in the correct direction and
attach it by securely pressing
surroundings of the back cover
■ Removing UIM
1
Hook a finger on the tab, pull the
tray out (
1
) and remove the UIM
(
2
)
:
Do not allow the UIM to fall when removing it.
Notch
IC (gold)
Tray
Tab
Fit the notch of the UIM to that
of the tray.
Note that inserting or removing the UIM forcibly
may damage the UIM or deform the tray.
Refer to the UIM user’s guide for more
information on the UIM.
Do not misplace the UIM once it is taken out.
When the tray falls off, slide the tray in straight
along the guide rail.
SH-03C_e.book 26 ページ ２０１０年１１月１６日 火曜日 午後４時５１分