Sharp LYNX 3D SH-03C Docomo, Инструкция по эксплуатации

Страница: 115 / 144

113
SH-03C_e_09.fm
[113/133]
Appendix/Index
■ Terminal operation
■ Calling
If calling, transmitting or another
function is performed for a long time
with charging, the FOMA terminal may
become warm and charging lamp may
flash. Charge again after the terminal
temperature lowers.
P. 29
Becomes hot while operating/charging
The FOMA terminal, battery pack or
adapter may become warm while
operating or charging or when watching
1Seg for a long time with charging.
There is no safety hazard.
P. 29
Battery usage time is short
Make sure the battery pack is not left
for a long time outside the service area.
Outside the service area, since electric
waves are searched to make
transmission available, more electric
power than usual is used.
P. 29
The usage time for the battery pack
depends on the usage environment and
deterioration level.
P. 29
Battery pack is a consumable product.
Service time per charge is gradually
reduced every time the battery is
charged.
Purchase a specified new battery pack
if the usage time becomes extremely
shorter than when the battery was
purchased even after fully charged.
P. 30
Power turns off/The FOMA terminal restarts
Unclean terminals for the battery pack
may result in poor connections and loss
of power. Wipe with a dry cloth or a
cotton swab.
–
Not activated by touching or pressing keys
Make sure the FOMA terminal is not
turned off.
P. 32
Screen response is slow when touching or
pressing keys
This may happen when a great deal of
data is saved in the FOMA terminal or
when a large amount of data is
transferred between the FOMA terminal
and the microSD Card.
P. 68
UIM does not recognize
Is a UIM inserted facing right direction? P. 25
Clock is wrong
Clock may become wrong if the power
is turned on for a long time.
Make sure the setting is set to adjust
time automatically and turn the power
on again in a location with good signal
conditions.
P. 69
Calls cannot be made by touching or pressing
keys
Make sure Restrict calls of Lock Setting
is not set.
P. 64
Make sure Offline mode is not set. P. 61
Ring tone does not sound
Make sure phone ring volume of
Incoming voice call is not set to [0].
P. 62
Make sure Public mode, Manner mode
or Offline mode is not activated. P. 58
P. 61
P. 62
Make sure Call blocking is not set. P. 61
SH-03C_e.book 113 ページ ２０１０年１１月１６日 火曜日 午後４時５１分