Sharp FO-4500, Руководство по обслуживанию

Страница: 10 / 192

2
Push the pressure plate down until it locks into position.
3
Place a stack of paper in the cassette, print side up. Make sure
the two far corners of the paper go under the paper holders as
shown.
•
Make sure the stack of paper is not higher than the tabs at the
top of the paper guide. If it is, remove some of the paper.
4
Put the cassette back in the fax.
5
If desired, attach an A4 label to the cassette.
6
Rotate the received document tray back. Grasp the hand hold on
the original document IN tray as shown, and open it.
7
Place the paper in the tray.
8
Close the original document IN tray.
9
If desired, attach an A4 label to the fax as shown.
FO-4500H
1 – 8