Sharp AQUOS R, Руководство пользователя

Страница: 15 / 182

13
Getting Started
AQUOS R
Charging with ROBOQUL
Charge using the included ROBOQUL [SHEGH1] and a
separately-sold AC Adaptor (USB Type-C Quick Charge™ 3.0)
[ZSCAZX]
1
.
When charging using ROBOQUL and handset is powered on,
ROBOQUL swivels when Display lights up, at start of charging,
for incoming calls, alarms, etc. See "
Using ROBOQUL " for
details on setting ROBOQUL motion.
Use ROBOQUL on a flat and stable surface.
Handset does not quick-charge when using ROBOQUL. See
"
Handset " for charge times with an AC Adaptor/ROBOQUL.
1 SoftBank SELECTION USB Type-C quick charge AC Adaptor
[SB-AC17-TCQC]
Insert USB Type-C plug on AC Adaptor into ROBOQUL power
connection terminal
Raise plug on AC Adaptor and plug into household AC outlet
Insert ROBOQUL charging plug into External Connection Jack
(
), and lean handset backward ( )
Charging/Notification Lamp illuminates once charging
starts.
・Press handset firmly and straight all the way. If not
attached adequately, handset may fall or ROBOQUL may tip
over. Avoid scratching handset when attaching.
・Charging/Notification Lamp goes out when charge is full.
・To continue using ROBOQUL after charging, skip
and .
After charging, remove handset from ROBOQUL and disconnect
USB Type-C plug on AC Adaptor
・Hold down ROBOQUL while pulling handset straight up.
Unplug AC Adaptor and lower plug
Using ROBOQUL Functions
You must set permissions for ROBOQUL to use functions
beforehand. See "
Before Using ROBOQUL " for details.
Charging with AC Adaptor
Use a separately-sold AC Adaptor (USB Type-C Quick Charge™
3.0) [ZSCAZX]
1
.
For information on other peripheral devices, see SoftBank
Website.
1 SoftBank SELECTION USB Type-C quick charge AC Adaptor
[SB-AC17-TCQC]
Insert USB Type-C plug of AC Adaptor into External
Connection Jack
Raise plug on AC Adaptor and plug into household AC outlet
Charging/Notification Lamp illuminates once charging
starts.
・Charging/Notification Lamp goes out when charge is full.
After charging, remove USB Type-C plug from External
Connection Jack, then unplug AC Adaptor and lower plug