Sharp AQUOS R, Руководство пользователя

Страница: 169 / 182

167
Safety Precautions
AQUOS R
TV
・Handset transmissions may be disrupted inside buildings,
tunnels or underground, or when moving into/out of such
places; may affect TV viewing.
・As handset transmissions differ according to where used,
TV viewing may not be possible in some areas. View in a
location with good handset transmission.
Urgent News (Application)
・Urgent News is enabled by default (can also be disabled).
・Alert tones are muted in Manner mode.
・Alerts are not received during calls/transmissions or in poor
signal conditions.
(Alerts can be received during voice calls over VoLTE.)
・Depending on usage/situation, handset may receive alerts
for other areas or no alerts.
・Standby Time may decrease when Urgent News is enabled.
・SoftBank Corp. cannot be held liable for any damages
associated with this service, including accidents resulting
from received information, reception timing or reception
failure.
Technical Regulations Conformity
Certification
Handset conforms to technical regulations pursuant to the
Radio Law and the Telecommunications Business Law. To check
technical regulations conformity certification information
(e.g.,
):
In Home Screen, Flick Hot Sheet up (Settings)
About phone Authentication
Voluntary Control of Radio Interference
Handset conforms to technical regulations pursuant to
the Rules for Voluntary Control Measures of VCCI; the
corresponding conformity mark is shown on electronic rating
plate on handset. To check the electronic rating plate:
In Home Screen, Flick Hot Sheet up
(Settings)
About phone Authentication
ROBOQUL
・ROBOQUL is designed for use in Japan.
You assume all responsibility if used abroad.
Use abroad may infringe on the country’s/region’s laws;
check before using.
・Do not apply excessive force to make ROBOQUL swivel. Do
not apply excessive force to charging plug base to move it.
May cause malfunction.
ROBOQUL Firmware Updates
ROBOQUL firmware is updatable. When an update is required,
"Updating ROBOQUL" appears on handset. Follow onscreen
prompts to update firmware.
・To update firmware, the following conditions are required.
・ROBOQUL is connected to an AC Adaptor
・Handset is placed in ROBOQUL
・Handset is connected to the network
・At least 30% battery is remaining
・The firmware update will be interrupted if the battery
becomes too low or handset/AC Adaptor is removed from
ROBOQUL.
ROBOQUL will become unusable if a firmware update is
interrupted. Make sure that the required conditions are met,
and then connect handset to ROBOQUL again and complete a
firmware update.
・Handset checks for firmware updates via the network once a
week when placed in ROBOQUL.
Firmware is also updated via the network.
Transmission fees are incurred when using the network.