Sharp Actius PC-MC24, Руководство по эксплуатации

Страница: 123 / 146

Appendixes
A-23
4. When the message < F2> to enter System Configuration Utility appears, press
F2 . The Setup Utility will open.
5. Insert the Recovery CD disc 1 into the optical drive.
6. In the Exit menu, select Load Setup Defaults ; then, press Enter twice.
7. In the Boot Sequence of the Main menu, select CD-ROM Drive in the 1st Boot
Device field and Hard Disk Drive in the 3rd Boot Device field.
8. Click OK .
9. In the Exit menu, confirm Exit Saving Changes is highlighted and press Enter
twice.
10. Read the message on the screen, and select the way to recover your system; then,
press
Enter .
When you select Recovers both C: and D: drive , the recovery process will
delete the recovery data installed in the hard disk. Therefore you will not
be able to recover your system from the hard disk.
11. Read the message and select Continue ; then, press Enter . Follow the on-screen
instructions for replacing the recovery CDs.
Although the pointer may be shown on the screen, never touch the
keyboard, the mouse or the screen during recovery except when the
message prompts you to. If you touch them, the re-installation will be
canceled.
12. After the recovery process is complete, the system will restart automatically.
When the message <
F2> to enter System Configuration Utility appears, press
F2 . The Setup Utility will open.
13. In the Exit menu, select Load Setup Defaults ; then, press Enter twice.
14. In the Exit menu, confirm Exit Saving Changes is highlighted and press Enter
twice. The system will restart.
15. Set up Windows, following the instructions on the screen. Make sure to set date
and time.