Wireless Charging
The SKILLER SGM3 can be wirelessly charged. To do this, place the SKILLER SGM3 on the contact
surface of a compatible wireless charging device. The contact area of the mouse is on the
underside, in the middle of the lower three mouse feet. As soon as the SKILLER SGM3 begins the
charging, the SKILLER logo on the top of the mouse will start to pulsate in red. When the battery is
90 % charged, the SKILLER logo will no longer pulsate and the illumination will change to green.
Charging
Your Mouse
Cable Charging
To charge the SGM3 with the included
USB cable, connect this as shown in
the section “Connecting to the PC”.
Make sure that the wireless operation
is switched off by using the switch (H)
on the underside of the mouse. As
soon as the SKILLER SGM3 begins the
charging, the SKILLER logo on the top
of the mouse will start to pulsate in red.
When the battery is 90 % charged, the
SKILLER logo will no longer pulsate
and the illumination will change to
green. The mouse can also be used
while being charged through the
connected USB cable.
