sharkclean .com
sharkclean .com
UPRIGHT
NOTE:
All accessories are compatible with both the wand and the handle.
WHOLE-HOME CLEANING
CLEANING MODES
To engage brushroll, turn power on,
then step on floor nozzle and tilt
handle back.
Select surface setting:
O Off
I Hard Floor
For bare floors and small area rugs.
II
Carpet
For carpets.
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green:
The brushroll is spinning and working as it should.
Solid Red:
There is a jam in the brushroll area. Turn your vacuum off, unplug from the wall and
remove any blockages in the nozzle.
Flashing Red:
The motorized floor nozzle is overheating. Turn off the vacuum, unplug it, and
remove any blockages. Let the vacuum cool down for at least 60 minutes before restarting.
See Troubleshooting section for more information.
Suction Control
offers variable suction
based on your needs. Slide to
MIN
to reduce
suction and increase maneuverability on
carpets. Slide to
MAX
to increase suction on
bare floors.
With the pod removed, press the
Wand
Release
button to detach the wand from
the pod.
Press the
Handle Release
button on the back
of the wand to detach the handle from the wand.
Press the
Lift-Away
button to detach
the pod from the floor nozzle.
POWER/SURFACE SWITCH
INDICATOR LIGHT
ABOVE-FLOOR—HANDLE
LIFT-AWAY® MODE
SUCTION CONTROL
LIFT-AWAY® WAND
WHOLE-HOME CLEANING
SETTINGS
BRUSHROLL INDICATOR LIGHT
NOTE:
For deep carpet cleaning per ASTM F608 (embedded dirt in carpets), use Carpet setting and set suction control to MAX.
NOTE:
Brushroll spins in all modes.
