FPO
sharkclean .com
sharkclean .com
EMPTYING THE DUST CUP
To remove
Dust Cup
, lift tabs on both sides
of dust cup handle. Tilt dust cup, then lift
to remove.
To reinstall, place bottom of dust cup into
pod and then tilt until it clicks into place.
To empty debris into trash, press lower release
button and bottom of dust cup will drop open.
To remove collected debris from
Lint Screen
,
press top release button and lift handle to
open. Gently brush lint screen to clean.
CLEAN HEPA FILTER
EVERY YEAR
Press button at bottom of
Filter Door
. Tilt
filter door and lift out. Remove
HEPA Filter
.
To reinstall, insert HEPA filter into unit and
replace the filter door.
CLEAN PRE-MOTOR FILTERS
EVERY 3 MONTHS
Remove
Dust Cup
, then lift out
Filters
.
Regularly clean and replace the filters to keep your vacuum's suction power optimal.
To clean filters, rinse with cold water ONLY to prevent damage from cleaning chemicals.
Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid
from being drawn into electric parts.
CLEANING AND REPLACING THE FILTERS
CLEANING FILTERS
IMPORTANT:
DO NOT
use soap when cleaning the filters.
IMPORTANT:
Unplug the power cord before performing any maintenance.
Empty the dust cup each time you vacuum and periodically during cleaning,
when debris in the dust cup reaches the MAX fill line.
Filter
Door
NOTE:
To order replacement parts and filters, visit
sharkaccessories.com
.
Replacement
Pre-Motor Foam
s& Felt Filter Kit
XFFKZD400
Replacement
HEPA Filter
XHFZD400
Follow instructions for removing filters. The
Pre-Motor Filter
should be replaced every 2.5 years.
The
HEPA Filter
should be replaced every 3 years.
REPLACING FILTERS
Foam
Filter
Felt
Filter
Post-Motor
Filter (HEPA)
