SEWOO LK-P20, Техническое руководство

Страница: 46 / 47

46
2-inch Label Technical Manual
“journal”
default “label”
Memory Parameters
memory.flash_size getvar This parameter refers to the total amount of Flash
memory.
memory.flash_free getvar This parameter refers to the amount of available Flash
memory.
memory.ram_size getvar This parameter refers to the total amount of Random
Access Memory.
memory.ram_free getvar This parameter refers to the amount of available RAM.
Odometer Parameters
odometer.label_dot_length getvar Reports the length of the last label printed (or fed), in
dots. The label dot-length is set to zero when the
printer is turned on. This parameter is updated every
time the printer feeds or prints a label and detects a
marker, either gap or bar, while printing or feeding.
getvar odometer.latch_open_count
setvar “0”
~
“65535”
This parameter refers to the number of times the
printer’s latch has been opened. The latch open count
can be set to an initial value and incremented every
time the latch is opened. Typically the latch is opened
each time a roll of media is loaded.
default “0”
odometer.media_marker_count getvar This parameter refers to the media marker count. The
media marker counter keeps track of how many labels
have passed through the printer, (if they have been
printed or not) by counting the bar sense marks on the
back of the media.
getvar odometer.user_label_count
setvar “0”
~
“65535”
This parameter refers to the user label count. The user
label counter keeps track of how many labels have been
printed.since the last re-set of the counter. The user’s
label count can be set to an initial value and
ncremented every time a label is printed.
default “0”
Power Parameters
getvar power.Inactivity_timeout
setvar “0”
~
“65535”
This parameter refers to the inactivity timeout.
A value of “0” disables inactivity timeout
default “120”
power.low_battery_timeout getvar This parameter refers to the low battery timeout. When