34
2-inch Label Technical Manual
K.
SET-TOF Command
This command is used to program the distance between the top-of-form and the end of the next or
previous eye-sense mark or gap.
Format
! U1 {command} {d}
Command & option
{command}
SET-TOF
{d}
The distance between the top of form and the end of the next or previous eye-
sense mark or gap.
L.
SETLP-TIMEOUT
If the printer does not receive any characters after a set time, it will begin to print. This delay can be
set with the SETLP-TIMEOUT command. The range of the time out is 0 to 255.
Format
! U1 {command} {time in 1/8 second units}
Command & option
{command}
SETLP-TIMEOUT
{time in 1/8 second units}
Multiply the seconds to wait by 8 to get the correct time for the
command (125ms)
