32
2-inch Label Technical Manual
C.
Moving With X and Y Coordinates
Even though the printer is in a line print mode, it can still move down and across the paper using X
and Y values.
Format
! U1 X {unit value}
! U1 Y {unit value}
! U1 XY {x unit value} {y unit value}
! U1 RX {unit x value to move relative to present position}
! U1 RY {unit y value to move relative to present position}
! U1 RXY{unit x value to move relative to present position} {unit x value to move
relative to present position}
{unit value}
Unit value
{x unit value}
X Unit value
{y unit value}
Y Unit value
{unit x value to move relative to present position} Unit X value to move relative to present
position
{unit y value to move relative to present position} Unit Y value to move relative to present
position
D.
LMARGIN Command
The LMARGIN command sets the left margin in line print mode.
Format
! U1 LMARGIN {dots to offset from left}
{dots to offset from left}
The value of Left margin
E.
SETBOLD Command
The SETBOLE command will make text bolder and slightly wider. The value is an offset number from
0 to 5. Be sure to issue a “! U1 SETBOLE 0” command to turn the bolding off when done.
Format
! U1 SETBOLD {value}
{value}
Value Range from 0 to 5
F.
SETSP Command
The SETSP command is used to change spacing between text characters.
Format
! U1 SETSP {unit to separate characters}
{unit to separate characters}
The space between each characters
