27
2-inch Label Technical Manual
H.
SPEED Command
This SPEED command selects a speed level within a range of 0 to 5, with 0the slowest speed.
Format
{command} {speed level}
Command & option
{command}
SPEED
{speed level}
A number between 0 and 5, 0 being the slowest speed.
I.
SETSP Command
The SETSP command is used to change spacing between text characters.
Format
{command} {spacing}
Command & option
{command}
SETSP
{spacing}
Unit measurement between characters. The default for spacing is zero.
☞
☞
☞
☞ NOTE:
NOTE:
NOTE:
NOTE:
That this command is affected by the UNIT command setting.
J.
ON-OUT-OF-PAPER Command
ON-OUT-OF-PAPER can be issued to instruct the printer as to the course of action to action to take
when it encounters an error while printing the label. There are two instructions; PURGE and WAIT
Format
{command} {action} {number of retries}
Command & option
{command}
ON-OUT-OF-PAPER
{action}
PURGE: Discard the label if printer error is encountered after the specified
number of attempts. WAIT: Do not discard the label if printer error is
encountered. In this mode the printer will wait for the error to be corrected
before making eh nest print attempt.
The default printer configuration is ON-OUT-OF-PAPER PURGE 2
