44
2-inch Label Technical Manual
characters
“setpin”. This parameter is not used when the
“bluetooth.authentication” parameter is set to “default”
or “off”. See “bluetooth.authentication”.
bluetooth.date
getvar
This parameter is the release date of the Bluetooth
module.
getvar
bluetooth.discoverable
setvar
“on”
“off”
This parameter sets the Bluetooth discoverable mode
default “on”
getvar
bluetooth.friendly_name
setvar
any
srring
of
20
characters
or less
This parameter sets the friendly_name, which is part of
the local_name used during service discovery and also
affects authentication. The friendly_name is a string of
up to 20 characters long; it will default to the printer
serial number if not set by the user.
bluetooth.local_name
getvar
This parameter is the local name that will be provided
during service discovery. It is a combination of the
printer model name and the friendly_name
bluetooth.version
getcar
This parameter is the Bluetooth library version number
Comm Port Parameters
getvar
comm.parity
setvar
“n” (none)
“e” (even)
“o” (odd)
Printer’s comm. parity
default “n”
getvar
comm.baud
setvar
“9600”
“19200”
“38400”
“57600”
“115200”
Printer’s comm (cable) baud rate.
default “19200”
getvar
comm.stop_bits
setvar
“1”
“2”
Printer’s comm. port stop bits
default “1”
Device Parameters
getvar
device.friendly_name
setvar
A string of
Up to 16
characters
This parameter refers to the device’s friendly name. The
printer will report its serial number as friendly name if a
name has not been assigned to it yet.
device.reset
do
Instructs the printer to perform a soft reset.
device.languages
getvar
This parameter sets the programming language
recognized by the printer.
device.restore_defaults
do
Instructs the printer to restore factory default values for
the specified category of parameters.
File Parameters
file.delete
do
This command can be used to delete printer files.
file.dir
getvar
This parameter refers to the printer file directory
file.print
do
This command can be used to print the contents of
