11
2-inch Label Technical Manual
B.
FONT-GROUP(FG) Command
The FG command gives a user the ability to group up to 10 pre-scaled font files into a single group. A
user can later specify the font group in a TEXT command. If a font group is used in a text command,
the printer will use the largest font specified in the font group that will produce the required text data
and still remain within the available width of the label the text. When specified in the TEXT command,
the
{
font
}
parameter is specified as FG, and the
{
size
}
parameter is specified as the
{
fg
}
. Note that a
user can also specify an FG command within a CONCAT/ENCONCAT command.
Format
{command} {fg fn fs} {fn, fs} …
Command & option
{command}
FG
{fg}
Font group number. Up to 10font groups can be specified, Valid font groups
rage from 0 to 9.
{fn}
Number of the font
{fs}
Size identifier for the font
☞
☞
☞
☞ NOTE:
NOTE:
NOTE:
NOTE:
Up to 10 font number/font size pairs can be assigned to a font group.
