14
2-inch Label Technical Manual
E.
COUNT Command
The COUNT command is used for printing multiple labels where a numeric text field or numeric data
encoded in a bar code is to be incremented or decremented for each label. The TEXT/BACODE
command string must contain this numeric data as the last characters of the string. The numeric data
portion can be up to 20characters, and can be preceded by the ‘-’ sign. Incrementing or decrementing
the numeric data thru ‘0’ is not allowed, Leading Zeros will be retained. Up to 3 COUNT commands can
be used in a label file.
Format
{command} {numeric value}
Command & option
{command}
COUNT
{numeric value}
Any integer value up to 20 characters. The value can be preceded by a ‘ – ’
sign if decrementing of the TEXT/BARCODE value is desired, Leading zeros will
be retained in the output.
F.
SETMAG Command
The SETMAG command magnifies a resident font to the magnification factor specified.
Format
{command} {w} {h}
Command & option
{command}
SETMAG
{w}
Width magnification of the font (1~16)
{h}
Height magnification of the font (1~16)
☞
☞
☞
☞ NOTE:
NOTE:
NOTE:
NOTE:
The SETMAG command stays in effect after printing a label. To cancel any SETMAG values and allow
the printer to use its default font sizes, use “SETMAG 0 0”.
