SEW Movitrac B, Руководство по эксплуатации

Страница: 11 / 260

Operating Instructions – MOVITRAC® B
11
2
Target group
Safety notes
2.3 Target group
Any mechanical work may only be performed by adequately qualified personnel. Quali-
fied personnel in this context are persons who are familiar with the setup, mechanical
installation, troubleshooting and maintenance for this product. Further, they are qualified
as follows:
• Training in mechanical engineering, e.g. as a mechanic or mechatronics technician
(final examinations must have been passed).
• They are familiar with these operating instructions.
Any electronic work may only be performed by adequately qualified electricians. Quali-
fied electricians in this context are persons who are familiar with the electronic installa-
tion, startup, troubleshooting and maintenance for this product. Further, they are quali-
fied as follows:
• Training in electrical engineering, e.g. as an electrician or mechatronics technician
(final examinations must have been passed).
• They are familiar with these operating instructions.
All work in further areas of transportation, storage, operation and waste disposal must
only be carried out by persons who are trained appropriately.
2.4 Designated use
Frequency inverters are components for controlling asynchronous AC motors. Fre-
quency inverters are components intended for installation in electrical systems or ma-
chines. Never connect capacitive loads. Operation with capacitive loads results in over-
voltages and may destroy the unit.
The following standards apply, if the frequency inverters are marketed in the EU/EFTA:
• In case of installation in machines, startup of the inverters (meaning the start of
proper use) is prohibited until it is determined that the machine meets the require-
ments stipulated in Directive 2006/42/EC (machine directive); observe EN 60204.
• Startup (i.e. the start of designated use) is only permitted under observance of the
EMC (2004/108/EC) directive.
• The frequency inverters comply with the requirements of the Low Voltage Directive
2006/95/EC. The harmonized standards of the EN 61800-5-1/DIN VDE T105 series
in connection with EN 60439-1/VDE 0660 part 500 and EN 60146/VDE 0558 are ap-
plied to these frequency inverters.
Observe the technical data and the connection requirements specified on the nameplate
and the operating instructions.