SEW-Eurodrive PSH CM2H Series Скачать руководство пользователя страница 24

Страница: 24 / 68

Electrical installation

General information

Operating Instructions – Stainless Steel Servo Gearmotors

Electrical installation

5.1

General information

WARNING

Danger due to live parts.

Severe or fatal injuries.

•

Comply with the assembly specifications from the manufacturer.

•

Switch off the electrical system before working on the main switch and prevent it
from being switched on accidentally.

•

Ensure that work is carried out by trained specialists only.

•

Observe the 5 safety rules before commencing the work: Disconnect. Secure the
device against a restart. Check that no voltage is applied. Ground and short-cir-
cuit it. Cover or cordon off neighboring live parts.

WARNING

Electric shock caused by missing or faulty ground connection.

Severe or fatal injuries.

•

Each product must be secured with a ground connection.

•

Make sure to install the ground connection correctly.

•

Operate the product only with correctly connected protective earth, even for
short-time measuring or test purposes.

WARNING

Electric shock when disconnecting or connecting voltage-carrying plug connectors.

Severe or fatal injuries.

•

Disconnect all supply voltages.

•

Make sure that the device is de-energized.

•

Never plug or unplug the plug connectors while they are energized.

WARNING

Electric shock due to regenerative operation. Moving the output element generates a
voltage at the male contacts of the power plug connector.

Severe or fatal injuries.

•

Do not touch the male contacts in the power plug connector.

•

Install a touch guard at the power plug connector if no mating connector is
plugged in.

WARNING

Unsecured key skidding out of the keyway.

Severe or fatal injuries.

•

Only operate the motor with attached customer output element (e.g. gear unit), or
with a suitably secured key.

26880490/EN – 05/2022

Содержание PSH CM2H Series





































































Результаты поиска

Содержание PSH CM2H Series

Отзывы:

Похожие инструкции для PSH CM2H Series

Бренды по названию

Популярные бренды

SEW-Eurodrive PSH CM2H Series, Руководство по эксплуатации

Результаты поиска

Содержание PSH CM2H Series

Отзывы:

Похожие инструкции для PSH CM2H Series

Бренды по названию

Популярные бренды