SEW-Eurodrive PSH CM2H Series, Руководство по эксплуатации

Страница: 11 / 68

2
Safety notes
Electric work
Operating Instructions – Stainless Steel Servo Gearmotors
11
2.7.1 Restrictions of use
The following applications are prohibited unless the device is explicitly designed for
such use:
• Use in potentially explosive atmospheres
• Use in areas exposed to harmful oils, acids, gases, vapors, dust, and radiation
2.8 Electric work
2.8.1 Carrying out electric work safely
Observe the following information to carry out electrical work safely during installation
and maintenance:
• Electrical work may only be carried out by electrically skilled persons.
• Always adhere to the 5 safety rules for working on electrical components:
– Disconnect
– Secure the drive against restart
– Check that no voltage is applied
– Ground and short-circuit it
– Cover or safeguard neighboring live parts
• When the device is switched on, dangerous voltages are present on all power con-
nections as well as on any connected cables and terminals. This is also the case
even if the motor is at standstill.
• Ensure that all required covers are mounted before applying the supply voltage.
2.8.2 Regenerative operation of drives
Moving the output element (e.g. coasting) generates a voltage at the live components
of the motor connection. Observe the following information to avoid electric shock:
• Do not touch open live components (e.g. male contacts of the plug connector, ter-
minals).
• Secure all open live components with a touch guard.
• Secure the output shaft against rotation when working without touch guard.
2.8.3 Disconnecting and connecting plug-in connections while voltage is applied
An electric arc may occur when plug-in connections are disconnected or connected
while voltage is applied (e.g. connection between drive and control). Observe the fol-
lowing to avoid risk of injury, risk of electric shock and damage to property:
• Ensure that the product is de-energized before disconnecting and connecting the
plug-in connections.
26880490/EN – 05/2022