SEW-Eurodrive MOVIPRO ADC, Руководство по эксплуатации

Страница: 48 / 244

6
Mechanical installation
Requirements
Operating Instructions – MOVIPRO
®
ADC
48
6 Mechanical installation
6.1 Requirements
WARNING
Risk of crushing if the load falls.
Severe or fatal injuries.
• Do not sit or stand underneath the load.
• Secure the area where loads can fall down.
NOTICE
Danger of collision.
Damage to plant and device components.
• Always position the device so that it will not collide with other components or ele-
ments for operation along the travel distance.
Comply with the following prerequisites:
• Trained specialists perform the installation.
• The information provided in the technical data and the permitted conditions for the
operating location of the device are observed.
• The minimum clearance and the required gaps for using a mounting plate are
complied
with. For further information, refer to chapter " Minimum
clearance" (→
2
49).
• The device is only mounted using the intended mounting options.
• The selection and dimensioning of the mounting and locking elements are in line
with the applicable standards, the technical data of the devices and the local re-
quirements.
• The bore dimensions are calculated in line with the respective type of fixture. For
further information, refer to chapter "Assembly" (→
2
52).
• The mounting and locking elements fit into the existing bores, threads and counter-
sinks.
• All display and actuator elements are visible and accessible after installation.
22749055/EN – 04/2016