SEW-Eurodrive MOVIPRO ADC Скачать руководство пользователя страница 157

Страница: 157 / 244

Startup

Operating Instructions – MOVIPRO

ADC

157

Startup

WARNING

Risk of injury due to uncontrolled device behavior caused by ineffective emergency
switching off circuit.

Severe or fatal injuries.

•

Have the installation carried out only by qualified personnel.

WARNING

Risk of injury due to device malfunction caused by incorrect device setting.

Severe or fatal injuries.

•

Make sure that the installation was carried out by trained specialists.

•

Check the parameters and data sets.

•

Use only settings that are appropriate for the function.

WARNING

Risk of injury and possible damage to property if the motor starts up unintentionally.

Fatal or severe injuries and damage to property.

•

Set the device to a safe state.

•

Switch off the output stage.

•

De-couple the drive.

•

Deactivate auto reset for drives that start up automatically.

WARNING

Electric shock due to missing or defective protective covers.

Severe or fatal injuries.

•

Make sure all protective covers are installed properly.

•

Never start the device if the protective covers are not installed.

WARNING

Danger of electric shock due to open connections.

Severe or fatal injuries.

•

Never start the device if the touch guard is not installed.

NOTICE

Danger due to arcing.

Damage to electrical components.

•

Do not disconnect power connections during operation.

•

Do not connect power connections during operation.

22749055/EN – 04/2016

Содержание MOVIPRO ADC





















































































































































































































































Результаты поиска

Содержание MOVIPRO ADC

Отзывы:

Бренды по названию

Популярные бренды

SEW-Eurodrive MOVIPRO ADC, Руководство по эксплуатации

Результаты поиска

Содержание MOVIPRO ADC

Отзывы:

Бренды по названию

Популярные бренды