5
Electrical installation
Connection between MOVIMOT® and motor when mounted close to the motor
Compact Operating Instructions – MOVIMOT
®
MM..D with AS-Interface
31
5.8
Connection between MOVIMOT
®
and motor when mounted close to the
motor
Connection
between
MOVIMOT®
and motor
when
mounted
close to the
motor
If the MOVIMOT
®
inverter is mounted close to the motor, the connection to the motor
is realized with a pre-fabricated hybrid cable.
Only use hybrid cable from SEW-EURODRIVE for the connection between the
MOVIMOT
®
inverter and the motor.
The following designs are possible on the MOVIMOT
®
side:
• A: MM../P2.A/RO.A/
APG4
• B: MM../P2.A/RE.A/
ALA4
5.8.1
MOVIMOT
®
with APG4 plug connector
The APG4 design results in the following connection options to the motor, depending
upon the hybrid cable used:
Design
A1
A2
A3
MOVIMOT
®
APG4
APG4
APG4
Motor
Cable gland/
terminals
ASB4
ISU4
Hybrid cable
01867423
05930766
08163251
m
for DR.63
0816326X
m
for DR.71 – DR.132
05932785
W
for DR.63
05937558
W
for DR.71 – DR.132
A2
A3
ASB4
APG4
APG4
ISU4
A1
APG4
[1]
9007199713407627
[1]
Connection via terminals
21328994/EN – 11/2014
