7
Service
Status and error display
Compact Operating Instructions – MOVIMOT
®
MM..D with AS-Interface
57
7.1.2
Meaning of the status LED
The status LED is located on the top of the MOVIMOT
®
inverter.
The three-color status LED indicates the operating and error statuses of the
MOVIMOT
®
inverter.
LED
Color
Status
Meaning
Operating sta-
tus Error code
Possible cause
Off
Not ready
No 24 V power supply.
Yellow
flashing steadily
Not ready
Self-test phase is active or 24 V supply is present but the line
voltage is not OK.
Yellow
flashing evenly, fast
Ready
Brake release active without drive enable (only with S2/2 =
"ON")
Yellow
constantly lit
Ready but unit
inhibited
24 V power supply and line voltage is OK, but no enable sig-
nal.
If drive does not run when enable is present - check startup!
Yellow
2 x flashing, break
Ready for opera-
tion,
but manual mode
without unit ena-
ble
24 V power supply and line voltage OK.
Stop manual mode to activate automatic mode.
Green/yellow
flashing evenly with
alternating colors
Ready for opera-
tion, but timeout
Faulty communication with cyclical data exchange.
Green
constantly lit
Unit enabled
Motor is in operation.
Green
flashing evenly,
fast
Current limit
active
Drive operating at current limit.
Green
flashing evenly
Ready
Standstill current function is active.
Green/red/green
flashing evenly with
alternating colors, break
Localization func-
tion active
Localization function has been activated.
See parameter 590.
Red
2 x flashing, break
Error 07
DC link voltage too high.
21328994/EN – 11/2014