SEW-Eurodrive ECDriveS ECIO-8-24-00, Руководство пользователя

Страница: 38 / 43

9
Technical data
38
Manual
– ECDriveS® ECIO
9 Technical data
9.1 Basic Device
The following tables list the technical data for the device:
9.1.1 General
General
Power supply Voltage 24 V +/- 10 %
Standby current consumption less than 70mA
Minimum Operating Voltage 21 V
Maximum Operating Voltage 30 V
Storage temperature -40 °C to 120 °C
Ambient Operating temperature 0 °C to 50 °C
Humidity 5 % to 95 % non-condensing
Vibration 0.152 mm displacement, 1G peak
Mechanical Shock 20G peak for 10ms duration (1.0 ms)
Enclosure IP Rating IP54
Maximum current (for 8 outputs) 2.4 A
9.1.2 Inputs
Inputs PNP/NPN Auto-sensing (Default)
Up to 8 per module - 2 inputs per port
Programmable Push-Pull selectable
Minimum ON current 1.5 mA
Maximum OFF current 0.4 mA
Short Circuit protection( per side) 500mA max
Sensor port inputs are auto-sensing for the connected circuit type of either PNP or NP N.
Please note that both sourcing and sinking current will activate the input.
Each port utilizes load detection circuits between the +24V (Pin 1) and Gnd (Pin 3). Th is
circuit provides input to the processor to detect if a power consuming device is c onnect-
ed. Short circuit between Pin 1 and Pin 3 can cause damage to the load detection circuit
and render this function inoperable.
9.1.3 Outputs
Outputs PNP only
Output count Up to 8 per module
Maximum current ( per Output) 300 mA
Short-circuit protection threshold( per
Output 500 mA