SEW-Eurodrive ECDriveS ECIO-8-24-00, Руководство пользователя

Страница: 10 / 43

2
Safety notes
10
Manual
– ECDriveS® ECIO
Observe the information on climatic conditions in chapter "Technical dat a" of t he doc u-
mentation.
2.7 Storage
Observe the following instructions when shutting down or storing the units:

Make sure that the unit is not subject to mechanical impact during storage.

In the case of extended storage periods, connect the unit to the line voltage for at least
5 minutes every 2 years.

Observe the notes on storage temperature in chapter "Technical data".
2.8 Installation/assembly
Ensure that the product is installed and cooled according to the regulations in t he doc u-
mentation.
Protect the product from strong mechanical strain. The product and its mounting parts
must never protrude into the path of persons or vehicles. Ensure that components are not
deformed and insulation spaces are not changed, particularly during transport ation and
handling. Electric components must not be mechanically damaged or destroyed.
2.8.1 Restrictions of use
The following applications are prohibited unless the device is explicitly designed for s uc h
use:

Use in potentially explosive atmospheres.

Use in areas exposed to harmful oils, acids, gases, vapors, dust, and radiation.

Operation in applications with impermissibly high mechanical vibration and shock
loads in excess of the regulations stipulated in EN 61800-5-1.

Use at an elevation of more than 4000 m above sea level.

The product can be used at altitudes above 1000 m above sea level up to 4000 m
above sea level under the following conditions:

Taking the reduced continuous rated current into consideration, see chapter "Tech-
nical data" of the documentation.

Above 2000 m above sea level, the air and creeping distances are only suffic ient for
overvoltage class II according to EN 60664.

If the installation requires overvoltage category III according to EN 60664 you have t o
reduce the overvoltages on the system side from category III to II using additional ex -
ternal overvoltage protection.

If a protective electrical separation is required, then implement this outside the product
at altitudes of more than 2000 m above sea level (protective separation in accordance
with EN 61800
‑
5
‑
1 and EN 60204
‑
1)