Sequoia LISST-SL, Руководство по эксплуатации

Страница: 28 / 56

LISST-SL V2.1
User’s Guide
24
4. Shutting Down
Always, first turn off power at the TCB to avoid
electrical shorts while disassembling equipment
.
Again, make sure the pitot tube is pinched off.
You may delete unwanted files at this time. However, it is
a good idea to do that after downloading ALL files on a
PC.
To delete unwanted files, if you decide to do so, turn on
power on the TCB, go to SETUP, then choose DELETE
FILES from the menu. Follow procedures described in
section 3.1
5. Clean up
Always immediately cover the pitot tube with a pinched
tube or plastic cap provided with the instrument.
It is a good idea to wash the exterior of the instrument
and remove sediment from the pressure ports and
connector area.
Attach a clean water tube to the intake of the LISST-SL
and wash out the internal surfaces by passing a strong
flow of water through.
If preparing to store for a long duration, it is a good idea
to run chlorinated water through the system to prevent
biological growth on the internal surfaces.
6. Viewing Saved
Data
The next Section describes opening and processing the
.dat raw binary data files.
All other files can be opened and viewed with standard
Windows software.