Sequoia LISST-SL, Руководство по эксплуатации

Страница: 33 / 56

LISST-SL V2.1
User’s Guide
29
VII. Handling, Cleaning, Maintenance and
Storage
1. Handling
When handling the instrument, at all times please
remember that the LISST-SL is a high-precision optical
instrument.
Avoid mechanical shocks and impact to the LISST-SL or
the TCB as this may cause misalignment of the optical
parts, or damage to electronic assemblies.
Avoid scratching the touch panel display.
2. Cleaning
Clean the LISST-SL body with water each time after use,
and before storage.
It is a good idea to connect a hose to the intake and run
tap water through the system. This removes any grains
that may have accumulated in the pump.
Remove the pitot tube cap and clean the screen.
Replace.
Remove the red tapered plug form the top static port.
Flush water through all three static ports. Replace the
tapered plug and put a rubber band around the sensor
over the ports.
Clean the panel of the TCB using only a soft cloth. Never
apply abrasives or abrasive surfaces to the touch panel. It
scratches easily.
Do not use abrasive cleaners.
NEVER
use solvents such as toluene or acetone
for cleaning the TCB. If you do so the warranty will
be immediately voided!