Sequoia LISST-SL, Руководство по эксплуатации

Страница: 16 / 56

LISST-SL V2.1
User’s Guide
12
Setup Menu
Set Units
pressed on the TCB, first a brief picture of the LISST-SL
is flashed. After that, the main menu appears. The main
menu is where you make the key selections:
The SETUP button is for settings on the firmware of the
TCB (e.g. setting the clock, units etc.). The CALIBRATE
button is to collect a Background Scatter file. The
MEASURE button is to operate the instrument to collect
data. We now describe details of operation. These same
guidelines are also graphically shown on the Quick
Reference Sheet attached to the inside of the lid of the
TCB.
SET UP: Pressing the SETUP button takes you to a
panel with 4 choices
– (i) Set Clock, (ii) Set Units, (iii) List
saved files, and (iv) Delete saved files. From each of
these, you return to the SETUP menu by pressing the
CANCEL button at bottom right. Pressing the CANCEL
button again, from the SETUP menu takes you back to
the MAIN MENU. Now, more details.
First the small buttons: Click on the symbol at bottom
center, and you will see a panel showing information on
the instrument. Pressing the Done button returns to the
Setup Menu.
The button leads you to an option to set pump
speed. Leave it on Auto. For some laboratory work, e.g.
to blast the water channel at high velocity for cleaning or
for blowing out sediment in the system, choose MAX
power. Press cancel to return to Main Menu.
To set clock, press the SET CLOCK button. A new
screen will open and guide you to set the current time.
Use the key pad to set the date and time in the displayed
format. Please note that the date format is mm:dd:yy.
Once you have set up the clock and date, check the SET
CLOCK button at the bottom of the screen. By pressing
the CANCEL, you will go back to the Setup Menu above.
You may next choose to set the units of the display, e.g.
British units (feet, pounds,.) or SI units (m, Kg etc.).
Temperature is always only displayed in
o
C. From the Set
Up menu, choose Set Units.
The display on left gives you the simple option to press
the FEET or METERS button to set display in your
chosen units. Again, press the CANCEL button to return
to the SETUP menu.
The remaining choice on the SETUP menu is to display a
list of saved data files. The list only shows the .asc files,