LISST-SL V2.1
User’s Guide
46
APPENDIX G: List of Videos
1.
Preparing to purge the nose by removing the tail fin.
2.
Removing the nose.
3.
Removing bubbles that are in the ports.
4.
Taking out the pitot cap o-ring.
5.
Removing the 35um filter screen inside the pitot cap.
6.
Installing a 35um filter screen.
7.
Clearing the bubbles out of the nose ports.
8.
Removing the bubbles on the nose cone.
9.
Purging the pitot cap.
10.
Showing the o-rings in the nose cone.
11.
Assembling the o-rings in the nose.
12.
Screwing on the nose.
13.
Adjusting the nose to the alignment marks.
14.
Attaching the tail fin.
15.
Attaching the cleaning patch to clean the optics.
16.
Inserting the cleaning rod to clean the optics.
17.
An example of a head pressure applied to the pitot tube.
18.
Applying an artificial head on the pitot tube to purge the velocity sensor.
19.
Purging through the pitot tube until water drips from the static port.
20.
Mounting the 0.2um filter to the tail fin.
21.
Attaching the copper tube for filtered background collection.
22.
Filling the 0.2um filter.
23.
Filling tubes and connecting filter outlet to the copper tube.
24.
Connecting the filter outlet to the copper tube (on the correct side).
25.
Connecting the SL to TCB cable.
26.
Operating the TCB to purge the 0.2um filter.
27.
Using the View Rings feature on the TCB.
28.
An example of View Rings Before Cleaning the optics.
Содержание LISST-SL
Страница 1: ...Operating Manual LISST SL Version 2 1 LISST SL...
Страница 39: ...LISST SL V2 1 User s Guide 35...
Страница 45: ...LISST SL V2 1 User s Guide 41...
Страница 55: ...LISST SL V2 1 User s Guide 51 NOTES...
